Deformation compatibility - Globe Thesis

Keyword [Deformation compatibility] Result: 1 - 17 \| Page: 1 of 1
1.	The Preparation And Interface Behaviors Of Cu/Al/Cu Composite Foil
2.	The Research On Deformation Compatibility And Fracture Characteristics Of Dual Phase Steels
3.	Compatibility Of Deformation In Tial Alloy Canned-Forging And Numerical Simulation
4.	Bearing And Deformation Characteristics Of A Typical Composite Structure Of The Giant Forging Hydraulic Press
5.	The Reserach Of Hot Deformation Constitutive Model And Deformation Coordination Of Duplex Stainless Steel
6.	Study On Hot Deformation Behavior Of Lean Duplex Stainless Steel Under Different Phase Distribution Directions
7.	Study On Deformation And Fracture Behavior Of Layered Ti/Al Metal Composites
8.	Intergranular Deformation Compatibility In GW83 Alloy
9.	Study On The Deformation Behavior Of Magnesium Alloy Under Biaxial Stress State At Room Temperature
10.	Study On Whole Shear Statics Mechanical Modeling And Solution Method
11.	Plastic Deformation Behavior Of GW83 Magnesium Alloy With Gradient Structure
12.	Finite Element Anslysis Of Deformation Compatibility Of Mesostructure In Ferrite/Bainite Dual-Phase Steel
13.	Deformation Compatibility Behavior Of HCP Crystal Structure Alloys At Room Temperature
14.	Model And Application Of Assembly Deviation For Large Stiffened Thin-walled Structure
15.	Experimental Study Of Multi-phase Mg-Li-Zn-Y Alloys:Composition,Microstructure And Deformation Behavior
16.	Study On The Influence Of Loading Direction On The Hot Deformation Behavior Of Cr20Mn2Ni2 Duplex Stainless Steel
17.	Study Of Hot Deformation Mechanism And Recrystallization Behavior Of 2055 Al-Li Alloy
<<First <Prev Next> Last>> Jump to