Deformation Zone - Globe Thesis

Keyword [Deformation Zone] Result: 1 - 20 \| Page: 1 of 2
1.	Made Of Ultra-Fine Grained Construction Material By Transferring The Severe Plastic Deformation Zone During Friction Torsion Under Pressure
2.	Theoretical Research Of Groove Deformation Zone Of Wide Copper Strip Continuous Extrusion
3.	Study On Characteristic Model Of Deformation Zone In Plate And Strip Warm Rolling Process
4.	Research On Shape Distrotion Of The Prefabricated Hole Near The Plastic Bending Deformation Zone
5.	Study On Landslide Program Of West Waste Dump Deformation Zone Of Ha’erwusu Open-Pit Mine
6.	Microstructure Evolution Of Magnesium Alloy AZ31in Deformation Zone By Heavy Reduction Rolling
7.	The Forming Mechanism Researching Of Local Deformation Zone In Incremental Sheet Forming
8.	Numerical Simulation Of The Process Of TA15 By The Point Continuously Forging And Laser Rapid Forming
9.	Theoretical Analysis On Deformation Zone Of The PSW Rolling
10.	Numerical And Experimental Researches On Warm-Rolling Process Based On The Experimental Mill
11.	Analysis Of Material's Mechanical Behavior In The Deformation Zone Of Closed-Extruding Fine Blanking
12.	Study On Thermal Distribution Characteristics Of Cutting Deformation Zone Under Heavy Load Cutting Condition
13.	The Deformation Mechanism Analysis Of The Roll Forming Process For Ultra High Strength Steel
14.	Technology Research For Spinning Forming Of Long Spiral Bellows Based On Numerical Simulation
15.	The Mechanical-thermal Behavior In The Deformation Zone Of Closed Extruding Fine Blanking And The Influence On Forming
16.	Development Of ?90mm Three-roller Punching Machine And Research On Stainless Steel Perforation Deformation Process
17.	Development Of The New Y-type Rolling Mill And Research Of Its Controlling Characteristics
18.	Research On The Sidewall Upsetting Through Controllable Deformation Zone
19.	Microscopic Mechanism Study On Deformation Zone Of Vibration Cutting
20.	Study On Chip Formation Mechanism Of Cutting SiCp/Al Composites
<<First <Prev Next> Last>> Jump to