Font Size:
a
A
A
Keyword [Deform]
Result: 61 - 80 | Page: 4 of 10
61.
Research And Optimization On The 450T Precision Punching Machine
62.
Numerical Simulation Of 304 Stainless Steel Sheet Hot Rolling On Deform-3D
63.
Research Of Temperature And Force In The Process Of Hard-dry Cutting 30CrNiMo8
64.
Process Analysis And Finite Element Simulation On The High Temperature Friction Drilling
65.
Optimization And Experimental Research On Micro-milling Parameter
66.
FEM Simulation Of The Drill With Indexable Inserts Based On DEFORM
67.
Numerical Simulation Study On Solid-state Recycling Process Of Magnesium Alloy
68.
Research On Forming Process Of Screw Pump Stator
69.
Anode Milling Tool Wear Analysis And Determination Of Tool Life
70.
The Mold Design Of Cross Wedge Rolling With Eccentric Shaft And Numerical Simulation
71.
Study On The Process Optimization Of Pipe7050Al Alloy Extruding
72.
Investigations Of Large Wind Turbine Pitch And Yaw Of Bearing Steel
73.
Ground Movement And Deformation Law Analysis Of The Pan Yidong First Mining Face
74.
Research On Part Hot Gas Forming Process Of AZ31Magnesium Bellow
75.
Research On Drilling Performance Of Parabolic Slot Type Deep Hole Drill By DEFORM-3D
76.
Research On The Influence Of Hardened Steel40CrNiMo Residual Stress By Turning Parameters
77.
Forming Rules And Opimization Process Of Clinch Jointing Technique
78.
Deformation Force Modeling For The Whole Complex Forging Process And Its Verification
79.
Titanium Cutting Force Prediction Model And Optimization Of Processing Parameters
80.
Optimization Design Of The Parameters Of Cutting Temperature In Titanium Alloy Turning Process Based On Deform
<<First
<Prev
Next>
Last>>
Jump to
