Font Size: a A A
Keyword [Deep-hole processing]
Result: 21 - 40 | Page: 2 of 3
21. Study On Assembly Parts Of Tool And Boring Bar Dynamics Of BTA Deep Hole Processing System
22. The AP1000Nuclear Power Main Pipe Of Special Fixture Bending Deep Hole Processing Design
23. The Application Research Of Low-temperature Cold Technology In The Deep-hole Processing
24. The Structure Design And Parameterized Modeling Of The BTA Deep Hole Processing Cutting Tool
25. The Study On Mechanical Properties And Finite Element Analysis Of The Drilling System Of BTA
26. The Research On Drilling Temperature In Deep Hole Processing And Design Of Virtual Temperature Measuring Instrument
27. Dynamic Characteristics And Stability Analysis On BTA Deep-hole Boring Bar
28. The Simulation And Research On The Deep Hole Quasi-dry Processing Chip Device
29. Research Of On-line Monitoring Method For The System Of Cutting Fluid For The Deep Hole Processing
30. The Research Of The Deep Hole Cutting Chatter Suppression Strategies Based On MR Effect
31. Prediction Research On The Drilling Force Of The Gun Drill Axial Vibration Drilling
32. Analysis And Research On The Straight Error Of The Deep Hole Machining Based On The BTA Cutting Tool System
33. The Design And Research Of The Deep Hole Drilling Processing Cutting Parameter Expert System
34. Design And Research On Efficient Negative Pressure Chip Pumping System Of The Deep Hole Processing
35. New High Throughput Twist Drill Used In Deep Hole Drilling
36. Research On Eccentricity Mechanism Of BTA Boring Machining System Induced By Cutting Fluid Coupled Eccentric Pilot
37. Study On The Application Of Dynamic And Dynamic Support In Drilling Rod Anti - Deviation Of Deep Hole Machining
38. Study On The Processing Technology Of Carbon Fiber Reinforced Plastics
39. Forming Mechanism Of Inner Hole In BTA Deep Hole Processing With Mechanical Effect Constraint
40. Research On Deviation And Correction Technology Of Axial Deviation Of Deep Hole Machining
  <<First  <Prev  Next>  Last>>  Jump to