Font Size: a A A
Keyword [Crack-tip]
Result: 41 - 60 | Page: 3 of 4
41. A Study On Crack Propagation Behavior And Deformation Field Around The Crack Tip Of 7050 Aluminum Alloy Under Typical Fatigue Load
42. In-situ Tem Investigation Of The Plastic Behaviors On The Crack Tip Of Small-sized Single Crystal Niobium
43. Study On The Mechanisms Of Dislocation Emission From Crack Tip Induced By Hydrogen
44. DIC/DSI-based Studies On The Mechanical Behavior At Crack Tip And Crack Growth Mechanisms Of Ti-6Al-4V ELI Alloy Under Fatigue Overloads
45. Research On Residual Strength And Fatigue Life Of Cracked Metal Graded Composites
46. Study On Unified Parameter Of In-plane And Out-of-plane Creep Constraint Based On Crack-tip Equivalent Creep Strain
47. Effect Of Microstructure On Fatigue Life And Impact Toughness Of Austenitic Stainless Steel Welds Made By SMAW
48. The Research On Microstructural Damage Evolution Mechanism At Crack Tip And Fracture Resistance Of High Entropy Alloy
49. Lamellar Microstructure Of Ti-22Al-25Nb Alloy And The Quasi Cleavage Fracture
50. Study On CTOD Fracture Toughness Of X70M Pipeline Steel Weld Joint
51. Study On Nanoindentation Technology And Crack Tip Deformation Field Experimental Of Ternary Ferroelectric Single Crystal PIN-PMN-PT
52. Study On Influence Of Stop-hole Shape And Location On Fatigue Crack Growth Performance Of Sheet Metal
53. Fatigue Performance Of Specimens Repaired By Laser At Crack Tip
54. Study On Nonlinear Characteristics Of ?-mode Frature In Dense Rock Under High Temperature
55. Fracture Study on 2014-T6 (LT) Aluminum Alloy Sheet Using Critical-Crack-Tip-Opening-Angle Criterio
56. Measurement and modeling of temperature-dependent hydrogen embrittlement of chromium-molybdenum steel to enable fitness-for-service life prediction
57. J-T and J-Q characterization of surface crack tip fields in metallic liners under large-scale yielding
58. A three-dimensional crack tip element for energy release rate determination and delamination growth prediction
59. Chemistry and electrochemistry of environment-assisted cracking of an aluminum-zinc-magnesium-copper alloy
60. Evaluation of crack tip fields and fracture parameters in functionally graded materials
  <<First  <Prev  Next>  Last>>  Jump to