Font Size: a A A
Keyword [Crack growth]
Result: 1 - 20 | Page: 1 of 10
1. Fabrication, Microstructure And Mechanical Behavior Of Functionally-Graded SiC Particulates Reinforced Al Matrix Composites
2. Studies On Low Cycle Fatigue Behavior And Life Evaluation Technique For Special Pressure Vessel Steel 2.25CrlMo At Elevated Temperature
3. Study On Instability And Time Dependence Of Pillar In Hard Rock Mass
4. Study On The Rheologic Fracture Of Jointed Rock Mass Under Inducing Condition And Its Engineering Application
5. Study On The Theory And Application Of Leak-Before-Break Assessment Procedure For The Welded Pressure Pipeline
6. Room Temperature Creep And Its Effect On Fatigue Crack Growth Of Structural Steels
7. Ageing Precipitation Behavior And Mechanical Properties Of AA 7055 Aluminum Alloy
8. Microstructure And Thermal-shock Performance Of ZrB2-based Ultra High Temperature Ceramics
9. Research On High Cycle Fatigue Fracture Behaviour Of Medium-carbon Si-Mn High Strength TRIP Steel
10. The Relibility Study On Crack Growth Of New Low-carbon Bainitic Steel Weld Joints
11. Study On The Automatic System For Measuring Fatigue Crack Growth Rates And Thresholds
12. Mechanism Of Hydrogen Induced Delayed Crack In EBW Of Ti55 Alloy
13. Experimental Research On The Non-linear Viscoelastic Behavior During Creep Failure And Craze Damage In Polymers
14. Study On The Ability Of Water-Resistance Of Mine Floor Rock-Layers
15. Study Of Corrosion Fatigue Crack Growth Characteristic For 07MnNiCrMoVDR Steel In H2S Solution
16. Research On Representative Steel Fatigue Crack Growth At High Temperature And Computer Simulation
17. Research On Fatigue Crack Growth Of Typical Steels At High Temperature
18. On Fracture Mechanics Problems In FGMS By Using Layered Material Boundary Element Method
19. Room Temperature Creep At Crack Tip In SUS304 Stainless Steel And Its Influence On Fatigue Crack Growth
20. Effect Of Silicon Particle Morphology On Properties Of A356 Alloy Made From Electrolytic Low Content Titanium Aluminum Alloy
  <<First  <Prev  Next>  Last>>  Jump to