Cr alloys - Globe Thesis

Keyword [Cr alloys] Result: 1 - 20 \| Page: 1 of 3
1.	Structures Of Quasicrystal Approximants In Al-Cr Alloys
2.	Effect Of Shot Peening And Rare Earth Oxide Coating On The Oxidation Resistance Of Fe-Cr Alloys
3.	The Microstructure And Properties Of Cu-Cr In-Situ Composites Under The Tecnology Of High Temperature Gradient Directional Solidification
4.	Phase Selection And Microstructure Evolution Of Hypoeutectic Cu-Cr Alloys In The Initial Transeint Zone Under Unidirectional Solidification
5.	Liquid Phase Separation Of Cu-Cr Alloys
6.	Study Of Hot Corrosion Behaviors Of Pre-oxidized Fe-Cr Alloys Under KCl Deposits
7.	Effect Of Grain Size On High-Temperature Chemical Stabilities Of Fe-Ni-Cr And Fe-Cr-Al Alloys
8.	Studies On High-temperature Chemical Stabilities Of Cu-Co-Cr Alloys Prepared By Mechanically Alloying
9.	Research On Microstructures Of Ti-6Al-4Me(Me=Mo,Cr) Alloys
10.	Investigation On The Microstructure And Mechanical Properties Of Cu-Cr Alloys
11.	Research On Microstructures Of Ti-6al-4me(me=mo,cr) Alloys
12.	Study On Diffusion Mobilities For FCC Phase Of The Ni-Cu-Mn And Ni-Cu-Cr Ternary Systems
13.	Research On The Effects Of Trace Elements On The Aging Microstructures And Properties Of Cu-Zr-(Cr) Alloys
14.	Study On The Forming Process And Optical Properties Of Selective Laser Melting Co-cr Alloys
15.	Microstructure And Mechanical Properties Of Zr-Cr Alloys
16.	First-principles Study Of Lithium Insertion Properties Of Si-M(M=Ni,Cr) Alloys As Anode Materials For Lithium-ion Batteries
17.	XPS And First-principles Study On Electrochemical Corrosion Behavior Of Sputtered Fe-Cr Alloys Nanocrystalline Thin Films
18.	Investigation On Microstructure And Properties Of Cu-Cr Alloys Prepared By Vacuum Gas Atomization
19.	Study On Microstructure And High Temperature Properties Of Cu-Cr Alloys
20.	A First-principles Study On The Stability Of β And γ Phases In TiAl-Cr Alloys And Their Mechanics Properties
<<First <Prev Next> Last>> Jump to