Continuous Extrusion - Globe Thesis

Keyword [Continuous Extrusion] Result: 61 - 80 \| Page: 4 of 6
61.	The Research Of Technology And Die In Continuous Extrusion Of Microcellular Plastics
62.	Theory Research On Continuous Extrusion And Rolling Process Of Copper Strip
63.	Experiment And Research Of Self-resistance Heating System For Continuous Extrusion Machine Cavity
64.	Effects Of Process Conditions On The Microstructure And Mechanical Properties Of Product During Continuous Extrusion Of Copper Strip
65.	Structural Analysis Of The Spindle System Of TLJ630Continuous Extrusion Device
66.	Effect Of Preheating Temperature Of H62Brass Alloy On Continuous Extrusion Process
67.	Study On Numerical Simulation Of Continuous Extrusion Formability Differences Between Magnesium Alloy And Pure Aluminum Sheets
68.	Development And Application Of The Continuous Casting-Continuous Extrusion Preparation Technology For Aluminum Alloy Round Rod
69.	The Numerical Simulation And Analysis Of POM Continuous Extrusion Process
70.	The Temperature Distribution Analysis And Experiment Of Ground Tire Rubber’s Desulfurization In Counter Rotating Twin Screw
71.	Study On Deformation Behavior And Grain Refinement Of Industrial Pure Aluminum Sheet In Process Of Stepping Continuous Extrusion-rolling
72.	Optimization Of The Die Cavity For Continuous Extrusion Forming Based On Numerical Simulation
73.	Numerical Simulation Of The Continious Extrusion Process For Rectangular Cross Section Part
74.	Study On Preparation Technology And Equipment Improvement Of Spray Deposition Continuous Extrusion Al - 20Si Alloy
75.	Study On The Regional Control Of Spray Deposition Continuous Extrusion Hypereutectic Al - Si Alloy
76.	Microstructure And Properties Of Al - 20Si Alloy Prepared By Spray Deposition Continuous Extrusion
77.	Optimization Of Continuous Extrusion Forming Process Parameters Of AZ31 Magnesium Alloy
78.	Research On Continuous Extrusion Technology And Properties Of Re-combined Eucalyptus Fiber Profiles
79.	Microstructure And Properties Of Al-Fe-Cu Alloys Prepared By Horizontal Continuous Casting And Continuous Extrusion Forming
80.	Microstructures And Mechanical Properties Evolution Of An Al-0.74Fe-0.23Cu Alloy Processed By Repetitive Continuous Extrusion Forming
<<First <Prev Next> Last>> Jump to