Casting microstructure - Globe Thesis

Keyword [Casting microstructure] Result: 61 - 77 \| Page: 4 of 4
61.	Study On The Strenghthening And Toughening Of Cu-Zr-Al-Y Glassy Alloy And Its Horizontal Continuous Casting
62.	Study On Microstructure And Mechanical Properties Of Rheo-die Casting And Rheosqueeze Casting AZ91-2Ca-1.5Ce Alloy
63.	Research On Microstructure And Mechanical Properties Of Squeeze Cast Al-Mg-Si-Zn Alloys
64.	Microstructure And Properties Of Two-melts Cast Al-Mg-Si Alloys Subsequent To Plastically Deformed
65.	Research On Microstructure,mechanical Properties And Corrosion Behavior Of Cast AlSiMgCr Alloys
66.	Experimental Study On Mechanical Properties And Microstructure Of Aluminum-based Alloy Vacuum Suction
67.	Research On Semi-solid Squeeze Casting Of Copper Alloy Bushing And Its Heat Treatment Process
68.	Preparation,Microstructure And Mechanical Properties Of Reaction Bonded Boron Carbide Composites Fabricated By Gel-casting Process
69.	Study On Microstructure And Mechanical Properties Of SiC_p/Al 6082 Composites Prepared By Squeeze Casting
70.	Composition Design And Microstructure Properties Of A New Mg-Al-Si-RE Magnesium Alloy
71.	Study On Microstructure And Mechanical Properties Of High Vacuum Die-casting Al-7Si-Mg-Mn Alloys And Its Automobile Shock Absorber Tower
72.	Study On Prediction Of Microstructures Of Aluminum Alloys Using Neural Network Method
73.	Effect Of Ca On Microstructure And Mechanical Properties Of Rheo-squeeze Casting AZ91-Ce Magnesium Alloy
74.	Investigation On Microtsructure And Properties Of Non-heat-treat Strengthening Hpdc Al-Ce-Mg Alloys
75.	Research On The Investment Casting Technology For K4738 Alloy Exhaust Case
76.	Recycle Of ADC12 Casting Aluminum Scrap By Indirect Squeeze Casting
77.	Study On The Manufacture Of Grain-oriented Silicon Steel Based On Twin-roll Strip Casting
<<First <Prev Next> Last>> Jump to