Casting Mould - Globe Thesis

Keyword [Casting Mould] Result: 101 - 117 \| Page: 6 of 6
101.	Preparation And Properties Of Co-Ni-Graphene (G/Go) Composite Coatings On Continuous Casting Mould Surface
102.	Control And Optimization Of Continuous Casting Process Of Wide Width Stainless Steel
103.	Research On Temperature Control Method Of Low Pressure Casting Mould
104.	Development Of Cooling Process Design System For Die Casting Die Based On KBE
105.	Study On The Nozzle Parameters Of Slab Continuous Casting Mold Based On Liquid Level Fluctuation F Value
106.	Mould-Level Control System Of Continuous Casting Machine Based On Fuzzy PID
107.	The Design And Development Of Die Casting Mould Aided Tools Based On Pro/E
108.	Research On Key Technology Of Casting Powder Feeder For Continuous Casting Crystallizer
109.	Effect Of Air Gap At The Interface Of Mould-ingot On The Comprehensive Interfacial Heat Transfer Coefficient
110.	Research And Development On Mould Flux For Thin Slab Continuous Casting
111.	Design And Software Development Of Remote Operation And Maintenance Management System For Die Casting Mould
112.	Study On The Influence Of Differential Phase Electromagnetic Field And Mould Structure On Macroscopic Physical Fields
113.	Dynamic Fulcrum Amplitude Modulation Method And Dynamic Simulation For Nonsinusoidal Oscillation System Of Continuous Casting Mould
114.	Study On Taper Theory Of High Speed Continuous Casting Mould
115.	Study On Liquid Steel Flow Behavior And Submerged Nozzle Optimization In 300 Mm � 150 Mm Rectangular Billet Continuous Casting Mould
116.	Study On The Influence Of Abnormal Vibration Waveform Of Slab Continuous Casting Mould On Equivalent Stress And Deformation Of Slab
117.	Study On The Preparation And Properties Of New Graphite Ceramic Composite Mould
<<First <Prev Next> Last>> Jump to