Bolt - Globe Thesis - Globe Thesis

Keyword [Bolt] Result: 141 - 160 \| Page: 8 of 10
141.	Study On Surrounding Rock Control Technique Of Deep-Seated Roadway Driving Along Goaf In Haishiwan Colliery
142.	Study On The Stability Control Technology Of Surrounding Rock In A Roadway Driving Along Goaf Forward To Mining Face In Limin Colliery
143.	Analytical Analysis Of Certain Deformation Problems And The Bolt Design In Coal Stope And Caverns
144.	Research On Full-column Rock Bolt Supporting Of Gateway Of Deep Mine With Compound Roof
145.	Research On Creep Damage Characteristics Of Bolt-grouting Roadway Of Deep Mine
146.	Research On Deep Roadway Dynamic Yielding Supporting Technology In Da Anshan Coal Mine
147.	High Strength Prestressed Bolt And Anchor Combined Support Technology Research Of Coal Roadway Of Wangpo Coal Mine
148.	Study On Anchoring Quality And Rebar Deformation Characteristics Of Resin Bolts
149.	Study On Stability Characteristics Of Cracked Roadway’s Surrounding Rock And Its Controlling Technique In Deep Mine
150.	Analysis On The Damage Of The Weak Part In Compound Wall Rock Roadway And Support
151.	Optimization Study Of Compound Roof Roadway Bolting (Cable) Support Parameters
152.	ZigBee-based Force Dynamic Monitoring System Of Mine Bolt
153.	Effect Of Heat Treatment On Microstructure And Property Of Low Carbon Si-Mn TRIP Steel Of Bolt
154.	Optimization Of Stope Structure And Support Parameter In The Gently Inclined Medium Thick Orebodies
155.	Research On Bolt Strengthening Support In Large Cross Section Of Coal Roadway
156.	Research On Improving Bolt Mesh Supporting Technology Of High Stress Soft Rock Mining Roadway In Qingshui Mine
157.	Study On GFRP Bolt Support Under Contact-zone Of Ore And Rock In Daye Iron Mine
158.	The Stability Analysis Of Rocks Surrounding Deep Roadway Based On The Finite Element Method
159.	Experimental Study On Deformation And Failure Characteristics Of Abnormity Roadway Within Steep Soft Coal Seam With Hard Roof
160.	Study On Roadway Supporting Design Based On Bolt Pull-out Test
<<First <Prev Next> Last>> Jump to