Font Size: a A A
Keyword [Argon]
Result: 21 - 40 | Page: 2 of 10
21. Argon Arc Surfacing With Flux-cored Wires For New Type Of Casting High Cr Hot-Working Die Steels
22. Study On Properties And Microstructure Of 10Cr9Mo1VNb Steel
23. Studies On Microstructure And Property Of GH4169 Argon-arc Welding Joint
24. Research And Analysis Of Air Separation Process
25. The Study Of Water Modeling And Mathematical Simulation On 40t LF Ladle About Argon Bottom Blowing And Drain Operations
26. Mathematical And Hydromechanical Simulation On Fluid Flow In Argon Blowing Process In Ladle Furnace
27. Manufacturing Technique And Properties Of Wear Resistant Particle Reinforced Composite Coatings By Argon Arc Cladding
28. Study On Microstructure And Performance Of Ti-based Ti5Si3 Layers Prepared By Argon Arc Cladding
29. The Research On Argon-Arc Melt Injection NiCr-Cr3C2 Surface Composite Coating
30. Synthesis And Gas Sensitivity Of Aligned Carbon Nanotube Array Film
31. Oxidaton Of Metallic Particles In Atmospheric Plasma Spraying And Its Effect On Thermal Barrier Coating
32. Preparation Of WC-composited Wear-resistant Coating By Thermal Spray Methods
33. The Influence Of Gas Elements And Non-metallic Inclusions Removal Process On Microstructure And Performance Of Ni-based Alloys
34. A Plan And Research On Melt Stainlss Steel With Duplex-melting Process Of Submerged Arc Furnace And Argon Oxygen Decarburizing Furnace
35. The Process Mechanism Analysis And Control Method Research Of Steel-Making Bottom Blowing Argon
36. The Investigation On The Microstructure And Properties Of In-situ Synthesis TiC Particulate Reinforce Ni60A Composite Coatings By Argon Arc Cladding
37. Study On Heat-resistant Property Of Ti-based Ti5Si3 Layers Prepared By Argon Arc Cladding
38. Investigation Of The Argon Triple-point Realization In Quasi-adiabatic Conditions
39. Study On 50t LF Ladle About Argon Bottom Blowing Optimizing In Tangsteel
40. Study On The Control Of Molten Steel Cleanliness For Large Forgings
  <<First  <Prev  Next>  Last>>  Jump to