Aluminum foams - Globe Thesis

Keyword [Aluminum foams] Result: 21 - 36 \| Page: 2 of 2
21.	Studying The Dynamic Characteristics Of Aluminum Foams By Lagrange Analysis Method
22.	The Research Of High Performance Of Aluminum Foams Prepared By Infiltration Casting
23.	Study On Strengthening And Properties Of Open-cell Aluminum Foams
24.	Experimental Test And Analysis Of Dynamic Material Parameters Of Closed-cell Aluminum Foams
25.	Study On Powder Metallurgy Controllable Preparation Of Aluminum Foam And Foaming Mechanism Research Based On Synchrotron Radiation Technique
26.	Study On Powder Metallurgy Foaming Process And Mechanism Of Aluminum Foam
27.	Study On Aluminum Alloy Foams Materials For Heat Dissapation By Water Evaporation
28.	Study On The Fabrication And Properties Of Carbon Nanotubes/Aluminum Foam Composites
29.	Studies On Preparation And Compressive Properties Of Aluminum Foams Matrix Interpenetrating Phase Composite Materials
30.	Fabrication And Compressive Property Of In-Situ Grown Carbon Nanotubes Reinforced Aluminum Composite Foams Based On Rapid Powder Metallurgy Foaming Method
31.	Study Of Axial Deformation And Energy Absorption Characteristics Of Composite Foam-filled Thin-walled Tubes
32.	Wetting behaviour of aluminum alloys on ceramic substrates and its effect on the stability of aluminum foams
33.	On the compressive response of open-cell aluminum foams
34.	Mechanical behavior of open cell aluminum foams
35.	Fabrication Of CNT/Al Composite Foamfilled Tubes And Their Crushing Behavior And Energy Absorption Property
36.	Preparation Of Aluminum Foams By Powder Metallurgy Method Under Variable Pressure
<<First <Prev Next> Last>> Jump to