Agitator - Globe Thesis

Keyword [Agitator] Result: 41 - 60 \| Page: 3 of 4
41.	Gas-Liquid Mass Transfer Behavior In A Surface-Aerated Vessel Stirred By A Novel Long-Short Blades Agitator
42.	Mixing Characteristics Investigation In The Stirred Tank With Long-Short Blades(LSB) Agitator
43.	The Design Of Oil Water Backwashing Filter
44.	Analysis Of Grinding Efficiency And Key Parameters Influence Of Tower Mill
45.	Research And Design Of On - Line Intelligent Detection System For Pulp Concentration Based On ARM
46.	Study On Optimization Of Stirring In VC Suspension Polymerization Of Pilot Kettle
47.	Mixer Structure Design Andresearch Of Multi Physics Simulation
48.	Numerical And Experimental Investigation On Surface Aeration Mechanisms And Gas-liquid Dispersion Characteristics In A Stirred Tank With A Novel Long-short Blades Agitator
49.	Investigation On Immiscible Liquid-liquid Dispersion Characteristics In Stirred Tanks Using A Novel Multi-blade Composite Agitator
50.	Parameter Optimization And Mixing Performance Analysis Of Agitator Paddle For Pullulan Fermentation
51.	Research Of Multidisciplinary Coupling Simulation Of The Vertical Stirred Mill Based On DEM-CFD And Analysis Of The Screw Agitator Structural Strength
52.	Dynamics Of Whole-well Drill String Based On Mechanical Properties Of Hydraulic Oscillators
53.	Structural Design And Performance Study Of A New Type Of Agitator Based On Numerical Calculation
54.	Basic Studies On Growth Regularity Of Spherical Nickel Hydroxide And Simulation Of Reactor
55.	The Cementing Slurry Blender Flow Field Analysis And The Influence Factors Of Research
56.	Research On Structure Design And Performance Of New Type Agitator
57.	A Numerical Study On The Characteristics Of Fluid On The Agitaors
58.	Agitator Design And Flow Field Simulation Analysis Of Regenerating Pool
59.	The Research On Flow Field And Blade Wear In The Foaming Agitator With Aluminum Melt
60.	Pressure Equalizing Groove Structure Optimization And Gas Pressure Fluctuation Characteristics Analysis Of Hydrostatic Dry Gas Seal
<<First <Prev Next> Last>> Jump to