ANSYS /LS-DYNA - Globe Thesis

Keyword [ANSYS /LS-DYNA] Result: 81 - 100 \| Page: 5 of 7
81.	Study On Theory And Experiments For Damping Tools With High Slenderness Ratio
82.	The FEM Of Disc Cutting Machine Shear Lug Quality
83.	Research On Simulation And Experiment Of Grinding Optical Glass With Single Diamond Girt
84.	The Blasting Technology Research To Improve The Yield Of High-quality Limestone
85.	Design Research On Cutting Device Of Open-pit Continuous Mining Machine
86.	Numerical Simulation Research Of Deep-Hole Blasting Parameters Optimization And Safety Control In Tonglushan Mine Underground Stopes
87.	Research On Roll Forming Technology For High-strength Honeycomb Half-cell Structures
88.	Experimental Study Of Long-hole Pre-splitting Blast Through Strate In Floor Gateway To Increase Permeability Of The DINGJI Coal Mine
89.	Research On Propagation Rules Of Blast Shock Wave In Chemical Plant Area
90.	The Research Of Cold Roll Forming Seal Of Support Beam
91.	Experimental Study On High-Power Ultrasonic Machining
92.	Metal Stress Factors On Ultrasound Propagation Mode
93.	Research On Mangle Evenness Control Model For Cold Pad-batch Dyeing Padder
94.	Study On Improvement Of Open-pit Bench Blasting Quality Under The Condition Of Extremely Hard Rock
95.	Experimental Research On The Reverse Circulation Bit For Detecting Multilayer Cavities In Mines
96.	Edge Drop Of Finite Element Simulation In Cold Rolled Silicon-steel
97.	The Research Of Numerical Modeling Of Destress Blasting In A Deep Hard Rock Tunnel Wall
98.	Study On Dynamic Response Of High Slope Of Jianshan Phosphate Under Blasting Vibration
99.	SHPB Test And Numerical Simulation Of Gabbro In Lanjian Iron Ore
100.	The Single Pick Pick Dynamics Characteristic Research Of The Shearer Drum End Plate
<<First <Prev Next> Last>> Jump to