"hydrostatic testing" - Globe Thesis

Keyword ["hydrostatic testing"] Result: 41 - 60 \| Page: 3 of 10
41.	Research On Reliability Design Theory And Methods Of NC System
42.	Tensile Performance Of Woven Membrane Materials Under Uni-axial, Bi-axial And Multi-axial Loads
43.	Experimental Testing To Computational Modeling Of Polymeric Nanofibers-An Investigation Involving A Single-Strand Nanofiber To A Nanofibrous Scaffold
44.	Research On The Grading Theory Of The Size Coefficient Of Variation In The Electronic Testing For Raw Silk
45.	Preparation Of Carbon Fiber Reinforced Silicon Carbide Composites And The Thermal-insulation Materials For Aerodynamic Rudder At Low Temperatures
46.	Research On Optimizing Direct Control Technique Of Green Sand Quality Based On Fast Ingredient Testing Method
47.	Study On Catastrophe Evolution Mechanism Of Karst Water Inrush And Its Eengineering Application Of High Risk Karst Tunnel
48.	Installation,Debugging And Testing Of Higher Precision SMILETRAP Ⅱ
49.	Effect Of Back Pressure On Equal Channel Angular Pressing Of A Magnesium Alloy
50.	The Research, Development And Application Of Reservoir Simulator Based On PEBI Grid
51.	Measurement And Control Of Polymer PVT Relationships Based On Injection Molding Equipment
52.	Study On Strengthen Theory And Key Technologies Of Crankshaft Fillet Rolling
53.	Static And Dynamic Performance Analysis And Experimental Detection Of High Speed Motorized Spindles
54.	The Nondestructive Detection In Anchorage Quality Of Rock Bolts And Mechanism Research On The Prediction Of Laneway Surrounding Rock Stability
55.	Testing Research On Streaming Potential In Deep Stratum
56.	Research On Fast Testing Surface Tension Of The Molten Alloy And Real-time Evaluating Relative Quality Parameters
57.	Theoretical And Experimental Study On Desulphurization Through Electrostatic Atomization Of Lime Slurry
58.	Gas Time Series Analytical Method And Its Early-warning Application In Coalmine
59.	Analysis And Identification Technology Of System Errors Of Large Vertical Ultra-precision Machine Tool
60.	Study On Ultrasonic Testing And Evaluation Of Girth Weld Flaws For Cylinders Of Hydraulic Support Used In Coal Mine
<<First <Prev Next> Last>> Jump to