Font Size: a A A
Keyword ["Upper curve and lower line "Model]
Result: 1 - 20 | Page: 1 of 10
1. Fundamental And Technological Studies On Bioleaching Of Refractory Arsenical Gold Concentrates By Thiobacillus Ferrooxidans
2. The Research Of A New Kind Of Pressure Feedback Nitrogen Inflating Mechatronical Hydraulic Impactor System
3. Study For The Key Technology Of The Control System For The Igc650hcw Cold Strip Rolling Mill
4. Corrosion Fatigue Mechanism Of High Strength Aluminum Alloy And Full-life Engineering Model For Corrosion Fatigue
5. STUDY ON PULSE CORONA NON-THERMAL PLASMA REACTOR FOR SO2 REMOVAL IN FLUE GAS
6. Oxidative Dehydrogenation Of Butane Over V-Mg-O Catalyst And Selective Oxidation Of Lower Hydrocarbons Using Inert Inorganic Membrane Reactor
7. The Constrained Phase Transformation Behavior And Model Of TiTi Alloy Fibers Embedded In Aluminum Matrix
8. Research On The Micro-Modelling Of Metal Solidification Process
9. The Research Of Metal Removal Model In Field Controlled Electro-chemical Honing On Artificial Neural Network
10. An Investigation On The Applying Fundamentals Of Powder Feeding Laser Cladding
11. Study On The Theoretical Procedures Of Accurate Model Chemistry Calculations
12. Studies On Wettability And Adhesion Of The Substrates Of Flexible Lamiinated Fabrics
13. Study And Application Of High-Property Cu-Cr(Zr,Mg) In Situ Composite
14. The Experimental Investigation And Numerical Simul Ation Of Liquid-temperature Couple About Liquid Steel Autogyration Stirring In Model
15. Study On Visualization Simulation Of Roll Forming Process Based On Finite Strip Method
16. A Study On Computer Simulation And Experiment Of The Mechnical Tension Of The Band-saw Machine
17. Energetics Calculations Of Defects Of Crystals And Defect Structures Of Lithium Niobate
18. A New Type Of Drill And Its Grinding Technology
19. Study On Mass Integration For Waste Minimization
20. Preparation And Properties Of Polymeric Composites Filled With Low-Melting-Point Alloy
  <<First  <Prev  Next>  Last>>  Jump to