failure characteristics - Globe Thesis

Keyword [failure characteristics] Result: 1 - 20 \| Page: 1 of 3
1.	The Large-scale Shaking Table Test Study Of Dynamic Deformation Characteristics And Response Of Slope With Anti-dip Weak Interlayer
2.	The Study Of Centrifuge Model About Homogeneous Soil Slope Deformation Failure Process And Characteristics
3.	Research On The Compression Mechanical Behavior Of The Cenosphere Aluminum Maerix Composite Foam Material
4.	Study On Deformation Characteristics Of Instability And Sliding Model Of Creep Landslide
5.	Genetic Analysis And Stability Evaluation Of The Unstable Slope Of Wangjiapo Of The "8.03" Earthquake In Ludian
6.	Research On Stability Analysis And Engineering Treatment Of Fei Ngo Shan Landslide
7.	Research On The Deformation And Failure Characteristics And Stability Of No1 Bank Collapse Of Liuluogou Of Qiaoqi Reservoir In Baoxing County Sichuan Province
8.	Research On Damage And Failure Characteristics Of Rock Under Freeze-thaw And Loading Considering The Residual Strength
9.	The Research On Formation Mechanism Of Colluvial Landslide In Muchuang Country
10.	Study On Failure Characteristics And Influence Factor Of Explosion Metal Cylinders
11.	Numerical Simulation Of Compression Failure And Fluid Solid Coupling Considering The Heterogeneity Of Granite
12.	Loading And Unloading Mechanical Characteristics And Micro-failure Mechanism Of Weak Cemented Soft Rock Under Low Temperature
13.	Experimental And Theoretical Study Of Rock Failure Characteristics Under Loading And Unloading
14.	Shear Failure Evolution Mechanism Of Discontinuities And Anchoring Joints In Typical Composite Layered Rock Mass
15.	Damage Evolution Study Of Beishan Granite Under Complex Stress State And Environmental Conditions
16.	Study On Mechanical Properties And Failure Characteristics Of Layered Composite Rock Under Acid Environment
17.	Experimental Study On Dynamic Mechanical Properties Of Limestone After High Temperature
18.	Experimental Research On Crack Propagation Of Multi Fractured Rock Mass Material
19.	Researche On Deformation Characteristics Test And Micromechanical Analysis Of Rock At High Temperature Treatment
20.	Experimental Study On Making Rough Jointed Specimens Based On 3D Printing And Its Deformation And Failure Characteristics
<<First <Prev Next> Last>> Jump to