| In order to improve the level of safety management on construction site, the statistic management theory was adopted. In construction industry, the safety issue has been much more important nowadays. The purpose of this thesis is to improve the standard of construction industry safety standard using of six sigma level in the safety area. By analyzing the falling accidents in the construction industry, this thesis will build DMAIC model. This article will Define, Measure, Analyze, Improve, and Control in the whole process. By using the Fishbone Diagram and Failure Modes and Effects Analysis (FMEA), the result show that operation time and season, construction safety law and regulation systems, and the personality of the stuff, the type of the construction industry. These four key factors are responsible for high falling accident. Based on the analysis results, specific improvement schemes were proposed for the 4 key factors. |
