RAPID: Reconfigurable all-photonic interconnect for parallel and distributed computers

The relentless quest for processing speeds in the range of Teraflops and beyond has accelerated the need for scalable, parallel, High-Performance Computing (HPC) systems. For these systems to be scalable and attain the desirable performance, the interconnection network connecting the processors, must itself be scalable in both size and bandwidth. However, at higher bit rates and longer communication distances, fundamental electrical signaling limitations reduce the inter-processor communication bandwidth while increasing the power dissipation, thereby affecting not only the performance of HPC systems, but also their scalability.; In this dissertation, we propose an optical interconnect based architecture for HPC systems called RAPID (Reconfigurable All Photonic Interconnect for Distributed and parallel systems) that maximizes the bandwidth density, optimizes power consumption and enhances scalability using static wavelength allocation. We also present two cost-effective design alternatives of the architecture, a modified version called M-RAPID and an extended version called E-RAPID that minimizes the cost of the interconnect based on the number of transmitters required. In addition, we propose a detailed implementation and integration methodology of RAPID using current complimentary-metal-oxide-semiconductor (CMOS) technology.; In order to develop a flexible interconnection architecture, we provide dynamic system reconfiguration that further reduces the communication bottlenecks and achieves better resource utilization. Reconfigurability is realized by monitoring traffic intensities, and implementing dynamic bandwidth re-allocation (DBR) techniques that adapt to changes in communication patterns. A DBR technique - LockStep (LS) that balances the load on each communication channel based on past utilization is also presented.; While computer-aided design (CAD) tools have significantly assisted electronic system simulation, the field of system level opto-electronics modeling has lagged behind due to lack of simulation methodologies and tools. We present the design space of developing OPTISIM, a system level modeling and simulation methodology of optical interconnects for HPC systems. Using OPTISIM, we performed detailed simulation of RAPID architectures and compared it; to several electrical HPC interconnects using synthetic traffic patterns. Simulation results indicate that the reconfigured architecture shows 35% increased throughput and 20% reduced network latency as compared to HPC electrical networks. In addition, we performed system-level simulation of RAPID and compared to electrical interconnect using RSIM on Splash-2 suite benchmarks. The simulation results showed that RAPID outperformed mesh interconnect by 20% to 40% in terms of execution time for various applications.