| Timing offsets result from the use of real clocks that are non-ideal in sampling intervals. These offsets also known as timing jitter were shown to degrade the performance of the two forms of UWB systems---impulse radio and orthogonal frequency division multiplexing (OFDM)-based UWB. It was shown that for impulse radio, timing jitter distorts the correlation property of the transmitted signal and the resulting performance loss is proportional to the root-mean-square (RMS) value of the timing jitter. For the OFDM-based UWB, timing jitter introduced inter-channel interference (ICI) and the performance loss was dependent on the product of the bandwidth and the RMS of the timing jitter. A number of techniques were proposed for mitigating the performance degradation in each form of UWB. Specifically, for impulse radio, the methods of pulse shaping and sample averaging were provided, whereas for OFDM-based UWB, oversampling and adaptive modulation were given. Through analysis and simulation, it was shown that substantial gain in signal power-to-noise ratio can be achieved using these jitter-reduction methods. |
