cutterhead - Globe Thesis

Keyword [cutterhead] Result: 121 - 137 \| Page: 7 of 7
121.	Compilation And Generation Platform Construction Of TBM Cutterhead Load Spectrum Under Complex Conditions
122.	Coupling Analysis Of TBM Cutterhead And Rock Based On Energy Method And The Layout Optimization Of Cutters
123.	Research On The Theory And Application Of The Conical Cutterhead Of Shield Machine
124.	Research On Control Of Hydro-viscous Clutch And The Jam Breakout Technology Of TBM Cutterhead
125.	Research And Application Of Parametric Aided Design System For Cutterhead Of Composite Earth Pressure Balance Shield Machine
126.	Research On EPB Shield Cutterhead And Tools Wear Characteristics In Sandy Pebble Stratum
127.	Study On Mechanical Characteristics And Optimization Of Shield Cutterhead In Calcareous Nodule Stratum
128.	Study On Parametric Modeling Method For Cutterhead Of Composite Shield Machine
129.	Study On The Torque Prediction Of EPB Cutter-head During The Process Of Tunneling
130.	Study On Earth Pressure Balance Shield Cutterhead Adhesion Test And Soil Conditioning Mechanism In Clay Stratum
131.	Research And Design Of Multi Caliber Small Non Excavation Device Based On Guiding Reaming
132.	Research On The Influence Law Of Rock Mass And Excavation Parameters On The Load Of TBM Cutterhead
133.	Study On Liquefaction Potential And Control Technology Of Water-rich Fine Sand Layer Under Cutterhead Vibration During Shield Tunneling
134.	Deformation Uniformity Research Of Double-plat Cutterhead Of Full-face Rock Tunneling Boring Machine
135.	Study On Mucking Mechanism And Performance Of Special-shaped Cutterhead Of Full-face Rock Tunnel Boring Machine (TBM)
136.	Experimental And Numerical Simulation Study On TBM Full-scale Tunnelling Assisted By Free-face
137.	Research On The Mechanism Of Clogging Of Cutterhead And The Method Of Soil Conditioning In Strongly Weathered Mixed Granite Stratum
<<First <Prev Next> Last>> Jump to