Pressure distribution - Globe Thesis

Keyword [Pressure distribution] Result: 181 - 200 \| Page: 10 of 10
181.	Research On Shield Tunnel Synchronous Grouting Pressure Distribution Patterns And Stratum Deformation
182.	Study On Temperature-pressure Distribution Characteristics On Friction Pairs Of Multi Disc Wet Clutch For Vehicle
183.	Hydrodynamic Journal Bearing Design And Performance Analysis And Software Development
184.	Research On Riding Comfort Of Seat Based On Driver Body Pressure
185.	Lubrication Characteristics And Parameter Optimization Of Spherical Barrel-port Plate In Axial Piston Pump
186.	Research For Surface Wind Pressure Distribution Of The Steel Box Girder Under Simultaneous Actions Of Wind And Rain
187.	Design And Research On Dynamic Comfort Of The Automotive Drivers’ Seats Based On Body Sensation Measurement
188.	Outer Water Pressure Distribution In Tunnel Lining With Shallow And Water Plugging The Limit Of Technology Research
189.	Study On Modeling And Tribological Properties Of Water-based Lubricants
190.	The Numerical Study Of The Phase Control Method And The Acoustic Pressure Distribution For The HIFU Transcranial Focusing
191.	Study On Waterproof And Drainage Technology Of Mountain Tunnel In High Pressure And Rich Water Area Based On Blocking Groundwater And Limiting Discharge
192.	Evaluation And Research Of Automoblie Seat Comfort Based On Body Pressure Distribution
193.	Research On Comfort And Structure Improvement Of Driver’s Seat Based On Fine FE Model
194.	Research And Development Of The Seat Pressure Distribution Measurement System Used For Driver Fatigue Detection Research
195.	The Numerical Simulation Of The Wind Pressure Distribution Factors About The Olympic Games Main Torch Tower
196.	Performance Assessment And Fault Diagnosis Of Three Screw Pump
197.	Research On Air Bearing Capability Based Porous Integrated Restrictor
198.	The Research On The Characteristics Of Steady Fluid Field Of Cylindrical Spiral Dry Gas Seal
199.	Numerical Simulation And Analysis Of Wind Pressure Distribution For 800 M Span Cylindrical Reticulated Shell
200.	Study On Wind Pressure Distribution And Aerodynamic Interference Of Three Cylinders In Tandem Arrangement
<<First <Prev Next> Last>> Jump to