Research On Diameter Test Technology Of The First-grade Smooth Steel Products

First of all, this paper summarizes the current domestic and foreign diameter cylinder for the development of detection technologies. According to the principle of photoelectric detection, it introduce the basic theory of photoelectric and have a photo on the basic principles of photovoltaic devices, a photo-detection program in diameter. It proposes one of the possible problems.The full paper comprises five chapters:The first chapter in a comprehensive analysis of the measurement of the diameter of the current status of technology, combined with domestic and foreign research institutes and institutions of higher education in this area of the diameter detection efforts, a diameter of the importance of testing.The second and three chapters analyze photoelectric detection of light generating in the process of testing the basic theory of optical and electro-optical conversion in the removal of noise problems, especially in the third chapter, we are given the use of computer data processing program I hope to remove the noise caused by bad data.The fourth chapter of my personal testing program, how to achieve the steel cylinder diameter of the detection of specific programs and theoretical basis. On this basis, I receive information on how to deal with, and gives the specific process. Behind, but also gives the system has become.Chapter V of this article is the last chapter focuses on the work associated with the measurement of specific solutions to improve the accuracy of the measurement.