axial capacity - Globe Thesis

Keyword [axial capacity] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Behavior Of Square Concrete-Filled Steel Tube Structure Considering Bond State
2.	The Analysis Of The Ultimate Axial Capacity Of A New Light-Gauge Steel Wall
3.	Research On Soil Plug And Its Contribution To Axial Capacity Of Large-diameter Tubular Pile
4.	The Analysis Of The Ultimate Axial Capacity Of A New Light-gauge Steel Wall
5.	The Simplified Calculation Of The Extremity Strengthening Reinforcemen Of The T-shaped Column In Two-way Eccentric Compression Flexural And Axial Capacity.
6.	Study On Axial Capacity Of FRP Reinforced Concrete Filled Steel Tubes
7.	Research Of Grouted Connection To Improve The Axial Bearing Capacity In Offshore Wind
8.	Research On Penetration Mechanism Of Piezocone Penetration Test (CPTU) And Its Application On Pile Foundation Engineering
9.	Pile-soil Interaction And Assessment Of Design Methods Of Capacity Of Axial Loaded Driven Piles In Clay
10.	Pile-soil Interaction And Database Assessment Of Design Methods For Axial Loaded Piles Driven In Sands
11.	Study On Experiments And Analytical Methods Of Axially-loaded Circular RC Column Under Lateral Impact Loading
12.	Investigation On Mechanical Performance And Design Theory On Partially Prefabricated Steel Reinforced Concrete Columns
13.	Axial Performance Of A New Type Grouted Connection In Offshore Wind Turbine Foundation
14.	Study On Residual Bearing Capacity Of Ultra-high Performance Concrete-filled Steel Tubes After Lateral Impact Loading
15.	Study of grouted deep foundations in cohesionless soils
16.	Development of resistance factors for axial capacity of driven piles in North Carolina
17.	A new approach for estimating the axial capacity of driven piles in sand up to true soil failure
18.	Experimental Study On Mechanical Properties Of Axial Loaded High Strength Steel Reinforced Concrete Composite Column
19.	Research On Dynamic Response And Residual Axial Capacity Of Square Recycled Aggregate Concrete-Filled Steel Tube Columns Subjected To Blast Loads
20.	Study On Axial Capacity Of Chs K-joints Reinforced With Collar Plate
<<First <Prev Next> Last>> Jump to